|
Here are the answers to some questions that you may have.
- What happens when you stop jumping?
If you stop jumping, eventually, you will end up in the water. Not so bad on
a hot, sunny day! In order to keep the Water Skipper up out of the water, the
rider needs to either be jumping on the platform or riding a wave. A rider
can glide for small amounts of time, but then needs to start jumping again.
- Can I start from the water?
No. The Water Skipper can only be started from above the water's surface: for
instance, from a dock or boat. The Water Skipper does float by itself. If you
do end up in the water, simply swim back to where you started. Eventually,
when you get good at riding the Water Skipper, you will not end up in the
water unless you want to.
- How fast can the Water Skipper go?
The average cruising speed is 8-10 mph. You can reach a maximum speed of 17
mph. In order to keep the Water Skipper above the water, you need to go at
least 5 mph.
- Are there weight restrictions?
The maximum weight of the user is 250 pounds. The minimum is 70 pounds.
- Is it easy to assemble the Water Skipper? How small does it fold down?
The Water Skipper can be put together and taken apart in about 5 minutes. When
disassembled, it can be fit into a golf-size bag.
How The Water Skipper Works?
Every time you jump, the force of your weight compresses the fiberglass spring,
causing the back foil to change its angle. From the same impact of your jump,
the angled back foil is pushed downward to generate the propulsion.
The front foil is locked to a constant height in the water by the skimmer, which
planes on the surface of the water.
The image above shows the Water Skipper during the upward portion of the jump.
The image above shows the Water Skipper during the downward portion of the jump.
The force of the jumping pushes down on the back foil and compresses the spring.
|